Table of Contents
Advertisement
ST-292 User's manual
II.
Description of the device
ST-292 room regulator is intended for controlling the heating device (e.g. gas, oil or
electric furnace or the boiler controller). Its main task is to maintain the pre-set
temperature in the flat by sending a signal to the heating device (contact opening) when
the desired temperature is reached.
Advanced software enables the regulator to fulfil a wide range of functions:
maintaining the pre-set room temperature
manual mode
day/night program
weekly control
Controller equipment:
touch buttons
front panel made of 3mm glass
built-in temperature sensor
batteries
Controller versions:
v1 – wired, without backlight.
v2 – wireless, with temporary backlight. It may be optionally equipped with a
wireless external sensor. This controller version cooperates with an additional
signal receiver, installed near the heating device.
v3 – wired, with temporary backlight.
III.
Controller installation
The controller should be installed by a qualified person.
ST-292 controller may be installed as a panel mountable on the wall.
3
Advertisement
Table of Contents
