1. Manuals
  2. Brands
  3. TECH Manuals
  4. Thermostat
  5. ST-29 v1
  6. User manual

TECH ST-29 v1 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ST-292 User's manual
User manual
ST-292 v1-3
1

Advertisement

Table of Contents
loading

Related Manuals for TECH ST-29 v1

Summary of Contents for TECH ST-29 v1

  • Page 1 ST-292 User’s manual User manual ST-292 v1-3...

  • Page 2: Safety

    TECH Safety Before using the device for the first time the user should read the following regulations carefully. Not obeying the rules included in this manual may lead to personal injuries or controller damage. The user’s manual should be stored in a safe place for further reference.

  • Page 3: Description Of The Device

    ST-292 User’s manual Description of the device ST-292 room regulator is intended for controlling the heating device (e.g. gas, oil or electric furnace or the boiler controller). Its main task is to maintain the pre-set temperature in the flat by sending a signal to the heating device (contact opening) when the desired temperature is reached.

  • Page 4: Iii.a) Connection Diagrams

    TECH III.a) Connection diagrams The room regulator should be connected to the heating device via a two-core cable as illustated in the diagrams below: 1. Diagram: ST-292 regulator connected directly to the heating device. 2. Diagram: ST-292 regulator connected to the CH boiler controller.
  • Page 5 ST-292 User’s manual 4. Diagram: ST-292 room regulator connected to the heating device with load above 1A. 5. Diagram: ST-292 room regulator connected to a three-phase heating device. In the case of wireless connection, the diagrams presented above should be used – the two-core communication cable should be connected to appropriate sockets in the receiver.

  • Page 6: Receiver For Wireless Controller

    TECH Receiver for wireless controller ST-292v2 regulator communicates with the heating device (or the CH boiler controller) via radio signal sent receiver. receiver connected to the heating device (or CH boiler controller) via a two-core cable whereas the communication with the room regulator is performed wirelessly via radio signal.

  • Page 7: First Start-Up

    ST-292 User’s manual In order to change the channel, press and hold the channel change button. After the control light on the sensor flashes, the process of channel change has been initiated. Hold the button and wait until the light starts flashing again. The number of flashes corresponds to the first digit of the desired channel number.

  • Page 8: How To Use The Controller

    TECH VII. How to use the controller V.a) Principle of operation The main task of ST-292 room regulator is to maintain the pre-set temperature of the room by sending a signal to the heating device (contact opening) when the desired temperature is reached.
  • Page 9 ST-292 User’s manual  Manual mode In this mode the pre-set temperature is adjusted manually from the main screen view with the use of these buttons: . Manual mode is activated when one of these buttons is pressed. When the manual mode is activated, the previous operation mode enters ‘sleep mode’...

  • Page 10: V.b) Main Screen View And Description

    TECH V.b) Main screen view and description The user operates the device using touch buttons. While one parameter is being edited, the remaining icons are not displayed. 1. Current operation mode: a. weekly b. manual c. day/night 2. Current temperature of the room.

  • Page 11: V.c) Controller Functions

    ST-292 User’s manual Graphic icons: Time settings Weekly program selection Night from… Comfort temperature Day from… Economical temperature Weekly control settings Hysteresis Pre-set economical Channel selection temperature active Pre-set comfort temperature active V.c) Controller functions The user navigates the menu structure using , EXIT and MENU.

  • Page 12: V.c.2) Day Of The Week

    TECH V.c.2) Day of the week After entering the main menu, all icons which are not connected with the parameter which is being edited are not displayed. The first parameter is day of the week. Press until the current day of the week is displayed.
  • Page 13 ST-292 User’s manual changes. When the desired number appears on the screen, press MENU – the controller returns to the main screen view and the selected program number is set. Weekly program number  How to configure particular weekly programs Weekly program allows the user to define the time when comfort temperature and economical temperature will apply.
  • Page 14 TECH Editing weekdays parameters If the user wants to edit programs 7÷9, it is possible to edit the settings for each day separately. Press MENU in order to select a day. Editing parameters for Monday Step 3 – assign comfort temperature or economical temperature to particular hours An hour which is being edited is displayed on the controller screen.

  • Page 15: V.c.7) Pre-Set Comfort Temperature

    ST-292 User’s manual V.c.7) Pre-set comfort temperature Pre-set comfort temperature is used in weekly control mode and day/night mode. Press MENU button until the comfort temperature change panel appears on the screen. Press to set the desired temperature. Press MENU to confirm and move on to the next parameter or press EXIT to confirm and return to the main screen view.

  • Page 16: Technical Data

    TECH In order to change the channel, press MENU until the communication channel change panel appears on the screen. to set the desired channel. Press MENU and hold it for ca. 3 seconds to confirm and return to the main screen view or press EXIT to confirm and return to the main screen view.

  • Page 17: Table Of Contents

    ST-292 User’s manual Contents Safety ......................2 Description of the device ................3 III. Controller installation ................... 3 III.a) Connection diagrams ................4 Receiver for wireless controller..............6 External temperature sensor ................. 6 First start-up ....................7 VII. How to use the controller ................8 V.a) Principle of operation ..................
  • Page 18 Declaration of conformity no. 123/2013 Hereby, we declare under our sole responsibility that ST-292 230V, 50Hz controller manufactured by TECH, headquartered in Wieprz 1047A, 34-122 Wieprz, is compliant with the Regulation by the Ministry of Economy (Journal of Laws 155 Item 1089) of August 21, 2007 implementing provisions of the Low Voltage Directive (LVD) 2006/95/EC of January 16, 2007.
  • Page 19 ST-292 User’s manual...
  • Page 20 TECH...

This manual is also suitable for:

St-29 v2St-29 v3

Table of Contents