Table of Contents
Advertisement
COFDM - QAM CI
d. Versions menu
This menu displays the fi rmware versions for
the unit as well as the one of the QAM modulaor
(FPGA).
e. LCN menu
This menu lets you assign a LCN (Logical Channel
Number) to the services that are present at the
output (those marked ON or DCY in the "Services
menu"). These numbers can be useful in case of
compatible receivers.
If the service already has an assigned LCN at the
input, you can change it or remove it in the output
tables. To do this you must select 0000 as the LCN,
at that time will show "NO LCN. "
To change the LCN, make use of keys
This menu is not displayed in Transparent mode.
f. Language menu
This fi nal extended menu allows the selection of
menu languages (Spanish / English / German/
French):
Pressing keys
and
changes the selected
language.
and
or .
5.3. Saving Parameters
Once the desired value has been selected in any
of the menus (normal or extended), in order to
record the information, hold down the
approximately 3 seconds. The screen will display
the following:
Do not remove the programmer until the message
disappears.
If you change the confi guration data, but these
have not been recorded, the previous settings
are restored after 30 sec of elapsed time, ie, the
changes are canceled.
18
key for
Advertisement
Table of Contents
