Care And Maintenance - BIOS Diagnostics PROTOCOL PRECISION 12.0 Instruction Manual

Project Type
Instructions
UPC (For Reference Only)
The device frequently fails to measure
the blood pressure values, or the values
measured are too low or too high.
Every measurement produces varying
results although the instrument functions
normally and the values displayed are
normal.
Blood pressure values measured differ
from those measured by the doctor.
For assistance call BIOS Medical Blood Pressure Hotline: 1-866-536-2289

5. Care and Maintenance

a) Do not expose the device to either extreme temperatures, humidity, dust
or direct sunlight.
b) The cuff contains a sensitive air-tight bubble. Handle this carefully and
avoid all types of stress through twisting or buckling.
c) Clean the device with a soft, dry cloth. Do not use gas, thinners or
similar solvents. Spots on the cuff can be removed carefully with a
damp cloth and soapsuds. The cuff with bladder must not be washed in
a dishwasher, clothes washer, or submerged in water.
Date: February 12 2021
Customer: Thermor Ltd
Job Number: TH6151
Item Number: BD353
Designer: Alex Vranjesevic
Reason For Project:
Artwork is not to be amended or scaled. If any changes
New Item:
are required please send through Thermor office with
New Branding:
instructions, and we will amend here and resend artwork
Design Update:
through. PLEASE RETURN WITH SIGNATURE
N/A: X
1. Check the positioning of the cuff and cuff
2. Measure the blood pressure again, ensuring
Note that blood pressure fluctuates
continuously; therefore measurements will
show some variability.
Record the daily developement of the values
and consult your doctor.
Note: Individuals visiting their doctor
frequently experience anxiety which can
result in a higher blood pressure reading
than at home.
Revision: C
tension. The cuff should be snug but not
tight.
that you have remained motionless for
a sufficient amount of time to ensure an
accurate reading.
Contact: Graphic's Department
graphics@thermor-ins.com
Colour Breakdown