Using The Ac/Dc Power Adapter; Using The Device; Select The User; Setting Time, Date And Year - BIOS Diagnostics PROTOCOL PRECISION 12.0 Instruction Manual

Project Type
Instructions
UPC (For Reference Only)

2.4 Using the AC/DC Power Adapter

You may also operate this monitor using the included
AC/DC adapter. Use only the included adapter to avoid
damaging the unit.
1. Ensure that the AC/DC adapter and cable are not
damaged.
2. Plug the adapter cable into the AC/DC adapter port
on the top of the blood pressure monitor.
3. Plug the adapter into your electrical outlet. When the adapter is connected, no battery
current is consumed.

3. Using the Device

This section describes how to get the maximum benefit from your blood pressure monitor.
Follow the instructions carefully to get an accurate measurement of your blood pressure and
pulse rate.
NOTE: Setting the user, year, month, date and time is one sequential process

3.1 Select the User

1. Start with the monitor OFF, but with batteries or adapter
inserted.
2. Press the SET button twice, press the MEM button to
switch between User 1 and User 2.
3.2 Setting the Time, Date and Year
1. Immediately after selecting the user, press the SET button, the YEAR
will flash. Press the MEM button to choose the year and press SET to
store in the memory.
2. Repeat the same process to set the MONTH by pressing the MEM
button. Press the SET button to store it in the memory.
3. The same process is repeated to set the DATE. The date will flash and
can be changed with the MEM button. Afterwards, HOURS will begin
to flash.
4. TIME; hours, and then minutes can be set following the same
procedure by using the MEM button.
Date: February 12 2021
Customer: Thermor Ltd
Job Number: TH6151
Item Number: BD353
Designer: Alex Vranjesevic
Reason For Project:
Artwork is not to be amended or scaled. If any changes
New Item:
are required please send through Thermor office with
New Branding:
instructions, and we will amend here and resend artwork
Design Update:
through. PLEASE RETURN WITH SIGNATURE
N/A: X
Revision: C
Contact: Graphic's Department
graphics@thermor-ins.com
Colour Breakdown
M
H