Table of Contents
Advertisement
3.
MAINTENANCE AND CALIBRATION
3.1 Maintenance Schedule
Maintenance Schedule
TC39 Series Changer Operation Instructions
CAUTION:
Do not hose down or power wash electric tire changers.
Proper care and maintenance are necessary to ensure that the tire changer operates
properly. Proper care will also ensure that rims and tires are not damaged during the
mount/demount process.
Daily
Perform the Following Maintenance
Drain condensation from pressure regulator reservoir
by pressing in on the fitting located on the bottom of
the regulator.
For proper functioning, it's necessary to verify the
correct position of the valve, placed under the
regulator. To activate a correct drain function, the cap
must be rotated to the counterclockwise position (as
viewed from the bottom).
Check for worn or damaged rubber and nylon
components that should be replaced to prevent
damage from occurring. Replace worn parts as needed
(rubber pads and blocks, rollers, and mount/demount
head).
Clean all areas that contact rims or tires to prevent
possible scratching to rim.
Maintenance and Calibration • • • • 29
Hide quick links:
Advertisement
Table of Contents
