Tire Inflation - Hunter TC39 Series Operation Instructions Manual

2.8 Tire Inflation

NOZZLE IS NOT
HORIZONTAL
TC39 Series Changer Operation Instructions
Verify that the wheel has been properly clamped and centered.
Remove the valve stem core from valve stem. Removing the valve stem core will
allow the tire to inflate faster and the bead to seat easier.
Connect inflator hose to valve stem.
NOTE: To increase the effectiveness blast inflation nozzle, always
liberally lubricate the outer edge of the tire sidewall and pull
up on the tire while twisting to seal the bead.
Press the bead blaster hose on the wheel rim as shown below. Ensure the hose head
is pressed in.
NOTE: The nozzle should be horizontal for optimal performance.
INCORRECT
CORRECT
NOZZLE IS NOT
HORIZONTAL
NOZZLE IS
HORIZONTAL
INCORRECT
Basic Procedures • • • • 27