Bacnet Default Settings - Veris Industries E50H Series Installation Manual

Compact power and energy meters with bacnet ms/tp support

Hide thumbs

Table Of Contents

Table of Contents

E50H2, E50H5 Installation Guide

BACnet Default

Settings

ZL0071-0F

Page 17 of 28

Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.

Setting

Setup Password

00000

Reset Password

00000

System Type

40 (3 + N) Wye

CT Primary Ratio

100A

CT Secondary Ratio

PT Ratio

1:1 (none)

System Voltage

600 V L-L

Max. Theoretical Power

Calculated from AV2, AV3, AV5 & AV6 (with all default settings, this would be

103.92 kW)

Display Mode

1 (IEEE Units)

Phase Loss Voltage Threshold 10% of System Voltage

Phase Loss Voltage Threshold 25% Phase to Phase Imbalance

Demand: number of

1 (block mode)

subintervals per interval

Demand: sub-interval length 900 sec (15 min)

(AV11 default value is 90000 [1/100 seconds])

BACnet MAC Address

001

BACnet MS/TP Baud Rate

76.8 kBaud

BACnet MS/TP Max_Master

127

BACnet Device_ID

Pseudo-random value

from 1,000,000 to 3,097,151

BACnet Device Location

Installed location not yet identified

Trend_Log Object 1

AI1 (Real Energy)

Log_Device_Object_

Property **

Trend_Log Object 2

AI27 (Reactive Energy)

Log_Device_Object_

Property **

Trend_Log Object 3

AI34 (Total Real Present Demand)

Log_Device_Object_

Property **

* Default values are preset at the factory. Once changed, there is no way to automatically reset defaults. They must be restored individually. The baud rate and

MAC address are set through the user-interface screens, and the others are set by re-writing each Object (see BACnet Programming Information section, next

page).

** These values are available only on the E50H5. The E50H2 does not support the data logging functions.

Other companies' trademarks are hereby acknowledged to belong to their respective owners.

Default Value*

BACnet Object

n/a

AV2

AV3

AV4

AV5

AV6

AI45