RECORDING
GENERAL INfORMATION ON RECORDING
RECORDING fROM THE RADIO
1) Tune to the desired radio station (see RADIO RECEPTION).
2) Press /
STOP/ EJECT to open the cassette door.
3) Insert a suitable cassette into the deck and close the cassette door.
4) Press RECORD and PLAY buttons together to start recording.
5) For brief interruptions, press PAUSE. To resume recording, press PAUSE again.
6) To stop recording, press /
RECORDING fROM CD
1) Set the FUNCTION selector to CD.
2) Press /
STOP/ EJECT to open the cassette door.
3) Insert a suitable cassette into the deck and close the cassette door.
4) Press RECORD and PLAY buttons together.
The recording function is now on standby mode.
5) Activate the CD player, and then press the PAUSE button to start recording.
6) To stop recording, press the PAUSE button first and then press the STOP button
on the CD player.
• This deck is not suitable for recording on CHROME
(IEC II) or METAL (IEC IV) type cassettes.
For recording, use NORMAL (IEC I) type cassettes
on which the tabs have not been broken. The best
recording level is set automatically. Altering
the VOLUME will not affect the recording in progress.
• At the very beginning and end of the tape,
no recording will take place during the 7 seconds,
when the leader tape passes the recorder heads.
• To protect a tape from accidental erasure, have
the tape in front of you and break out the left tab.
Recording on this side is no longer possible.
To record over this side again, cover the tab hole
with a piece of adhesive tape.
STOP/ EJECT.
TAPE DECK MAINTENANCE
To ensure quality recording and playback of the tape
deck, clean parts [A], [B] and [C] after approx. 50 hours
of operation or on average once a month.
Please contact qualified service technician for this
operation
1) Open the cassette door by pressing /
STOP/ EJECT.
2) Press PLAY and clean the rubber pressure roller
[C]
3) Press PAUSE and clean the magnetic heads [A]
and the capstan [B]
4) After cleaning, press /
the cassette door.
ENG - 37
STOP/ EJECT and close
ENG