About This Manual; Personnel; Safety - Ingersoll-Rand RS45i Product Maintenance Information

Contact-cooled rotary screw air compressor

Hide thumbs

Table Of Contents

Table of Contents

The purpose of this manual is to provide maintenance and troubleshooting guidelines for the compressor.

For supporting documentation refer to Table 1.

Publication

Product Safety Information Manual All

Product Information Manual

Product Maintenance Manual

Product Parts Information Manual

* Europe, Middle East and Africa

Product specification sheets and reference drawings are also available.

Proper use, inspections and maintenance increases the life and usefulness of the compressor. It is extremely important that

anyone involved with maintaining the compressor be familiar with the servicing procedures of these compressors and be

physically capable of conducting the procedures. These personnel shall have skills that include:

1. Proper and safe use and application of mechanics common hand tools as well as special Ingersoll Rand or

recommended tools.

2. Safety procedures, precautions and work habits established by accepted industry standards.

Some maintenance procedures are technical in nature and require specialized tools, equipment, training and experience

to accomplish correctly. In such situations, only allow Ingersoll Rand trained technicians to perform maintenance on this

compressor. Service or inspections beyond the procedures given in this manual shall not be attempted by operating personnel.

For additional information contact the Ingersoll Rand factory or the nearest service provider.

Before undertaking any work on the compressor, ensure that the electrical supply has been isolated, and remote start/stop

function is not enabled, locked off, tagged and the compressor has been relieved of all pressure. Ensure the compressor is

electrically isolated for at least 15 minutes before commencing any maintenance work. See the Product Safety Information

manual for additional information.

Ingersoll Rand cannot know of or provide all the procedures by which repairs may be conducted and the hazards and/or

results of each method. If maintenance procedures not specifically recommended by the manufacturer are conducted, ensure

that safety is not endangered by the actions taken.

If you are unsure of a maintenance procedure or step, place the compressor in a safe condition before consulting technical

assistance.

The use of other than genuine Ingersoll Rand replacement parts may result in safety hazards, decreased performance and

increased maintenance and may invalidate all warranties.

For additional information contact the Ingersoll Rand factory or the nearest service provider.

47612267 Rev B

RELEASED 11/Feb/2019 01:43:20 GMT