Digisol DG-FS1526HP User Manual page 27

Status: Can enable or disable the PoE function.
Class: Class 0 is the default for PDs. However, to improve power management at the PSE, the PD
may opt to provide a signature for Class 1 to 4.
The PD is classified based on power. The classification of the PD is the maximum power
that the PD will draw across all input voltages and operational modes. A PD shall return
Class 0 to 4 in accordance with the maximum power draw as specified by following Table.
Class
0 Default
1 Optional
2 Optional
3 Optional
4 Optional
Power Consumption (Watt): It shows the PoE supply Watts.
Current (mA): It shows the PoE device current Amp.
Current-Limit (mA): It can limit the port PoE supply Amp. Per port maximum value must less
PoE -> PoE Power Delay
This section provides PoE Power Delay Configuration.
Usage Range of maximum power used by the PD
600. Once power overload detected, the port will auto shut down and we
should manually enable the PoE port.
DG-FS1526HP User Manual
0.44 to 12.95 Watts
0.44 to 3.84 Watts
3.84 to 6.49 Watts
6.49 to 12.95 Watts
12.95 to 25.5 Watts
27