Table of Contents
Advertisement
394
4-5. Using the driving support systems
2
Press the switch to turn the
system ON.
3
Continue or reselect the
trailer in the message dis-
played on the multi-informa-
tion display.
When the selected trailer is being
used for the first time, setup (cali-
bration) is necessary (→P.396).
Once calibration is completed, it is
retained for future use and the sys-
tem will automatically detect the
trailer.
The driver needs to change the
trailer selection when using a differ-
ent trailer. The system does not
automatically recognize the trailer
from the saved trailers list.
4
Once trailer is detected, shift
the shift lever to R to activate
Guidance mode.
5
Touch the switch at the bot-
tom right on multimedia to
activate Straight Path Assist.
Owners Manual_USA_M0C029_en
"Trailer Direction"
When using Straight Path Assist,
the driver can override the system
using the steering wheel to adjust
the trailer direction. Upon release of
the steering wheel, Straight Path
Assist re-activates with a revised
straight back target direction.
■
When adding the trailer
Use the meter control switches to
select the trailer type. (P.93)
1
Press
or
to select
2
Press
or
to select "Trailer
Settings" and then press and
hold
.
3
According to the display, select
the desired setting and then
press
. (P.97)
Trailer Settings are not available
while Trailer Backup Guide system
is active.
The system is designed to support
trailers with single or multi-axles
using a ball hitch. The system does
not support fifth wheel or gooseneck
trailers.
Setup (Calibration)
Bring the vehicle and trailer to a
large open space like an empty
parking lot. Activate Trailer
Backup Guide system and fol-
low the instructions displayed on
the multi-information dis-
play/multimedia.
For best calibration results, do
not exceed 5 mph (8 km/h).
.
Advertisement
Table of Contents
