Table of Contents
Advertisement
When using the optical mirror
mode
1
Press the menu button.
The icons will be displayed.
2
Press the menu button
repeatedly and select
The setting display will be dis-
played.
3
Press
enable ("ON")/disable
("OFF") the automatic anti-
glare function.
The icons will disappear if a button
is not operated for approximately 5
seconds or more.
■
Adjusting the display (digital
mirror mode)
●
If the displayed image is adjusted,
it may appear distorted. This is not
a malfunction.
●
If the brightness of the Digital
Rear-view Mirror is set too high, it
may cause eye strain. Adjust the
Digital Rear-view Mirror to an
appropriate brightness. If your
eyes become tired, change to
optical mirror mode.
●
The brightness of the Digital Rear-
view Mirror will change automati-
cally according to the brightness
of the area in front of your vehicle.
Owners Manual_USA_M0C029_en
3-4. Adjusting the steering wheel and mirrors
■
To prevent the light sensors from
malfunctioning, do not touch or
cover them.
.
or
to
To prevent the light sensors
from malfunctioning
WARNING
Observe the following precau-
tions.
Failure to do so may result in
death or serious injury.
■
While driving
●
Do not adjust the position of the
Digital Rear-view Mirror or
adjust the display settings while
driving.
Stop the vehicle and operate
the Digital Rear-view Mirror
control switches.
Failure to do so may cause a
steering wheel operation error,
resulting in an unexpected acci-
dent.
●
Always pay attention to the
vehicle's surroundings.
The size of the vehicles and other
objects may look different when in
digital mirror mode and optical
mirror mode.
When backing up, make sure to
directly check the safety of the
area around your vehicle, espe-
cially behind the vehicle.
Additionally, if a vehicle
approaches from the rear in the
dark, such as at night, the sur-
rounding area may appear dim.
149
3
Advertisement
Table of Contents
