Table of Contents
Advertisement
136
3-3. Adjusting the seats
and exit the vehicle easily.
The shift lever has been
shifted to P.
The engine switch has been
turned off.
The driver's seat belt has
been unfastened.
When any of the following has
been performed, the driver's
seat and steering wheel auto-
matically return to their original
positions.
• The engine switch has been
turned to ACC or ON.
• The driver's seat belt has
been fastened.
■
Operation of the power easy
access system
When exiting the vehicle, the power
easy access system may not oper-
ate if the seat is already close to the
rearmost position, etc.
■
Customization
Some functions can be customized.
(P.566)
Recording/recalling a
driving position
Recording procedure
■
1
Check that the shift lever is in
P.
2
Turn the engine switch to
ON.
3
Adjust the driver's seat,
steering wheel and outside
rear view mirrors to the
desired positions.
Owners Manual_USA_M0C029_en
4
While pressing the "SET" but-
ton, or within 3 seconds after
the "SET" button is pressed,
press button "1" or "2" until
the buzzer sounds.
If the selected button has already
been preset, the previously
recorded position will be overwrit-
ten.
Recall procedure
■
1
Check that the shift lever is in
P.
2
Turn the engine switch to
ON.
3
Press one of the buttons for
the driving position you want
to recall until the buzzer
sounds.
■
To stop the position recall oper-
ation part-way through
Perform any of the following opera-
tions:
Advertisement
Table of Contents
