Table of Contents
Advertisement
266
4-5. Using the driving support systems
Resume"
Canceling and resuming
the speed control
1
Pressing the cancel switch
cancels the speed control.
The speed control is also canceled
when the brake pedal is depressed.
(When the vehicle has been
stopped by system control,
depressing the brake pedal does
not cancel the setting.)
2
Pressing the "+RES" switch
resumes the cruise control
and returns vehicle speed to
the set speed.
Approach warning (vehi-
cle-to-vehicle distance
control mode)
When your vehicle is too close
to a vehicle ahead, and suffi-
cient automatic deceleration via
the cruise control is not possi-
ble, the display will flash and the
buzzer will sound to alert the
driver. An example of this would
be if another driver cuts in front
of you while you are following a
vehicle. Depress the brake
Owners Manual_USA_M0C029_en
pedal to ensure an appropriate
vehicle-to-vehicle distance.
Warnings may not occur
■
when
In the following instances, warn-
ings may not occur even when
the vehicle-to-vehicle distance is
small.
When the speed of the pre-
ceding vehicle matches or
exceeds your vehicle speed
When the preceding vehicle is
traveling at an extremely slow
speed
Immediately after the cruise
control speed was set
When depressing the acceler-
ator pedal
Selecting constant speed
control mode
When constant speed control
mode is selected, your vehicle
will maintain a set speed without
controlling the vehicle-to-vehi-
cle distance. Select this mode
only when vehicle-to-vehicle dis-
tance control mode does not
function correctly due to a dirty
Advertisement
Table of Contents
