Table of Contents
Advertisement
310
4-5. Using the driving support systems
WARNING
●
Never depend on the parking
assist monitor entirely when
backing up. The image and the
position of the guide lines dis-
played on the screen may differ
from the actual state.
Use caution, just as you would
when backing up any vehicle.
●
Be sure to back up slowly,
depressing the brake pedal to
control vehicle speed.
●
If you seem likely to hit nearby
vehicles, obstacles, people or
mount the shoulder, depress the
brake pedal to stop the vehicle.
●
The instructions given are only
guidelines. When and how
much to turn the steering wheel
will vary according to traffic con-
ditions, road surface condi-
tions, vehicle condition, etc.,
when parking. It is necessary to
be fully aware of this before
using the parking assist system.
●
When parking, be sure to check
that the parking space will
accommodate your vehicle
before maneuvering into it.
●
Do not use the parking assist
monitor in the following cases:
• On icy or slick road surfaces, or
in snow
• When using tire chains or emer-
gency tires
• When the tailgate is not closed
completely
• On roads that are not flat or
straight, such as curves or
slopes
• If the suspension has been
modified or tires of a size other
than specified are installed
Owners Manual_USA_M0C029_en
●
In low temperatures, the screen
may darken or the image may
become faint. The image could
distort when the vehicle is mov-
ing, or you may become unable
to see the image on the screen.
Be sure to visually check all
around the vehicle both directly
and using the mirrors before
proceeding.
●
If the tire sizes are changed, the
position of the guide lines dis-
played on the screen may
change.
●
The camera uses a special lens.
The distances between objects
and pedestrians that appear in
the image displayed on the
screen will differ from the actual
distances. (P.317)
Screen display
The parking assist monitor
screen will be displayed if the
shift lever is shifted to R while
the engine switch is in ON.
Each time the display mode
switching button is selected, the
mode will change as follows:
Rear view: Displays the rear view of
the vehicle.
Wide rear view: Displays a near
180° image from the rear view cam-
era.
Advertisement
Table of Contents
