Advertisement
Assembly & Setup
16. Locate and install the seat height adjustment pop pin onto the
Spinner frame (Fig. 16) using the supplied multi size open
wrench.
Fig. 16
17. Locate and mount the seat slider assembly onto the seat post
by relieving spring tension on the large knob and pulling the
small thumb pin located on the underside of the seat post
slider (Fig. 17).
Fig. 17
18. Locate and insert the handle bar post into the corresponding
location on the Spinner frame (Fig. 18) by pulling on the "T"
®
style pull pin located above the front SPIN
badge.
Fig. 18
19
Advertisement
