Terminal Configuration - Pilz PSSu E F BSW Operating Manual

Wiring
6.2

Terminal configuration

}
Supply module
–
–
–
Base module
Screw terminals:
PSSu BS 2/8 S
PSSu BS 2/8 S-T
Cage clamp terminals:
PSSu BS 2/8 C
PSSu BS 2/8 C-T
Operating Manual PSSu E F BSW(-T)
21372-EN-06
To switch on/off the periphery supply to input/output blocks (block switching)
To interrupt the incoming (left-hand) periphery supply and C-rail supply
To provide subsequent (right-hand) modules with the periphery supply and C-rail
supply
Terminal configuration
11: Not connected
21: Not connected
12 -22: 0 V periphery supply,
interrupted to the left
(12-22 linked within the base
module)
13 -23: +24 V periphery sup-
ply
interrupted to the left
(13-23 linked within the base
module)
14 -24: C-rail supply,
interrupted to the left
(14-24 linked within the base
module)
11 21
12 22
13 23
14 24
24