Table of Contents
Advertisement
Available languages
Available languages
OTHER FEATURES
EQ
Press the "EQ" button on remote control, each press switch the EQ function as follows:
1 - CLASSIC
2 - ROCK
- POP
4 - JAZZ
5 - FLAT (NORMAL)
Notes:
The player not responsible for playability of MP3 in any case. Due to recording condition such
-
as PC performance, writing software, media ability or etc.
For CD-RW, CD-R, it may not be played according to the type of this disc.
-
EXTRA BASS
1)
Press the "BASS" button on remote control to enjoy extra bass sound effect.
2)
Display will show "BASS - ON".
3)
Press the "BASS" button again to switch off extra bass sound effect.
ID-3 TAG ( FOR MP3 ONLY )
1)
Press the "INFO / MONO / ST." button on remote control.
2)
ID3 information will show on display.
3)
Press the "INFO / MONO / ST." button agian to terminate.
INTRO
1)
Press the "INTRO" button on remote control to play each song for 15 seconds.
2)
Press the "INTRO" button again to resume normal playback.
MUTE
1)
Press the "MUTE" button to remove the sound during playing disc.
2)
Press the "MUTE" button again to resume the sound.
SLEEP
1)
Press the "SLEEP" button on remote control, display will show "SLEEP 90". That means,
after 90 minutes, appliance will automatically turn to standby mode.
2)
Press the "SLEEP" button again to select the automatically turn off time, from 90, 80, 70, 60,
50, 40, 30, 20, 10 minutes.
3)
Press the "SLEEP" button to "SLEEP 00" to canel sleep function.
CLOCK SETTING
1)
Press the "STANDBY" button to switch unit at standby mode.
2)
Press the "MEMO / ADJ." button twice to entry clock set mode. The display will show "24H"
and flashing.
3)
Adjust time format ( 12H / 24H ) by pressing the "SKIP +" or "SKIP -" button.
4)
Press the "MEMO / ADJ." button to confirm time format, display will show "AM" or "PM" if
12H format is set.
5)
Adjust hour by pressing the "SKIP +" or "SKIP -" button, press the "MEMO / ADJ." button to
confirm.
6)
Adjust minute by pressing the "SKIP +" or "SKIP -" button, press the "MEMO / ADJ." button
to confirm.
Notes:
Because clock setting is at standby mode, the display is dim.
ENG - 45
ENG - 45
ENG
Advertisement
Table of Contents
