Water Filter - Bosch TES 556 Series Instruction Manual

Hide thumbs Also See for TES 556 Series:
Table of Contents

Advertisement

Available languages

Available languages

10. Press the power switch O / I (9). The
display (16) shows the menu for setting
the display language.
11. Select the required display language
with the upper rotary knob (15).
The following languages are available:
Русский
English
12. Place a receptacle under outlet (6a).
13. Press the start button (10).
The l anguage you selected is saved.
The appliance heats up and rinses. Some
water will run out of the coffee outlet.
When the drink selection menu is shown in
the display, the appliance is ready for use.
Switching off the appliance
The factory settings of the fully automatic
espresso machine are programmed for
optimal performance. The appliance
switches off automatically after a specific
time (time span can be programmed, see
"Menu settings"
Shut off
Exception: The appliance switches off with-
out rinsing if only hot water or steam were
dispensed.
To switch the appliance off manually before
e
off /
this, press the
a ppliance rinses and switches off.
N.B.: If the appliance is being used for the
first time, a service program has been run,
or the appliance has not been operated
for a long period, the first beverage will
not have the full aroma and should not be
consumed.
When using the espresso machine for the
first time, you will achieve a suitably thick
and stable "crema" only after the first few
cups have been dispensed.
After extended use, water droplets may
form on the ventilation slots. This is normal.
).
j
button (13). The

Water filter

A water filter can prevent scale buildup.
Before a new water filter is used, it must be
rinsed. To do this, proceed as follows:
1. Press the water filter firmly into the
w ater tank with the aid of the measuring
spoon (19).
2. Fill the water tank (17) with water up to
the max mark.
3. Press and hold the
for at least three seconds. The menu
opens.
e
off /
4. Press the
r epeatedly until the display shows
No / Old filter
5. Select
Activate filter
rotary knob (15).
6. Press the start button (10).
7. Place a receptacle with a capacity of
0.5 litres under the outlet (6a).
8. Press the start button (10).
9. Water will now flow through the filter to
rinse it.
10. Empty the container.
The appliance is ready to use once more.
Note: Rinsing the filter simultaneously
a ctivates the setting for the
display.
e
j
off /
button (13)
j
button (13)
.
with the upper
Change filter!
en
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tes 559 series

Table of Contents