Control Panel - Caple WI3124 Instruction Manual

Control panel

CONTROL PANEL
Indicator light illuminates to signify the cooling mode is currently in operation
" "
•
Indicator light illuminates to signify the cooling mode is currently in operation.
TOUCH CONTROL KEYS
" "Button
•
Used to switch the internal light on/off
Used to switch the internal light on/off.
To switch the appliance on/off
(press and hold this button for approximately 3 seconds)
" " Button
•
To switch the appliance on/off
Used to raise the temperature in 1ºC increments
luminates to signify the cooling mode is currently in operation.
Used to lower the temperature in 1ºC increments
" " Button
•
n Temperature Alarm
Used to raise the temperature in 1ºC increments.
the internal light on/off.
If inner temperature is higher than 23°C, "HI" is shown in the display panel, and the
luminates to signify the cooling mode is currently in operation. TEMPERATURE ALARM
alarm sounds after one hour continuously. It warns you that the inner temperature is too
" " Button
•
high.
n
Used to lower the temperature by in 1ºC increments.
If inner temperature is higher than 23°C, "HI" is shown in the display panel,
If inner temperature is lower than 0°C, "LO" is shown in the display
mode is currently in operation.
n
mode is currently in operation. (press and hold this buttons for approximately 3 seconds).
ppliance on/off
and the alarm sounds after one hour continuously. It warns you that the inner
alarm sounds and the malfunction indicator lights at the same time.
the internal light on/off.
temperature is too high.
Setting the temperature
If inner temperature is lower than 0°C, "LO" is shown in the display panel, the
n
e temperature in 1ºC increments.
To set the temperature, connect the power cord to a properly grounded outlet. In the ev
•
alarm sounds and the malfunction indicator lights at the same time.
(press and hold this buttons for approximately 3 seconds).
ppliance on/off
a power interruption, the previous temperature setting is automatically erased and it will
to a preset temperature setting of 12°C
this buttons for approximately 3 seconds).
this buttons for approximately 3 seconds).
he temperature by in 1ºC increments.
e temperature in 1ºC increments.
Set the desired cooling temperature by pressing the buttons adjacent to the "
•
perature
indicators. Each press of the buttons will scroll through the available temperature settings
s.
s.
increments of 1°C.
he temperature by in 1ºC increments.
perature, connect the power cord to a properly grounded outlet. In the event of
ption, the previous temperature setting is automatically erased and it will default
The temperature setting can be adjusted from 5°C to 18°C
•
perature
perature setting of 12°C
To view the actual temperature at anytime press and hold the temperature adjustment bu
•
perature, connect the power cord to a properly grounded outlet. In the event of
d cooling temperature by pressing the buttons adjacent to the "
(up or down) for approximately 5 seconds, the actual temperature will temporarily flash in
ption, the previous temperature setting is automatically erased and it will default
h press of the buttons will scroll through the available temperature settings in
LED display for 5 Seconds. After this it will revert back to the set temperature.
ord to a properly grounded outlet. In the event of
perature setting of 12°C
ord to a properly grounded outlet. In the event of °C.
Flashing LED = Cabinet temperature
e setting is automatically erased and it will default
e setting is automatically erased and it will default
Steady LED = Set temperature
d cooling temperature by pressing the buttons adjacent to the "
re setting can be adjusted from 5°C to 18°C
h press of the buttons will scroll through the available temperature settings in
sing the buttons adjacent to the "
°C.
sing the buttons adjacent to the "
tual temperature at anytime press and hold the temperature adjustment button
l through the available temperature settings in
l through the available temperature settings in
r approximately 5 seconds, the actual temperature will temporarily flash in the
Note
Wi3124_Wi3124WH Wine Cabinet manual.indd 11
re setting can be adjusted from 5°C to 18°C
5 Seconds. After this it will revert back to the set temperature.
(press and hold this buttons for approximately 3 seconds
Please keep this instruction manual for future reference
Instruction manual Wi3124 & Wi3124WH
/ "
/ "
panel, the
/ "
/ "
29/08/2018 09:30
/
11