Rear Fan Assembly - Lenovo ThinkStation P520 30BE User Manual

What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 134.

Rear fan assembly

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page iii.
CAUTION:
Keep fingers and other parts of your body away from hazardous, moving parts. If you suffer an injury,
seek medical care immediately.
To remove or install the rear fan assembly, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 59.
2. Locate the rear fan assembly. See "Computer components" on page 7.
3. To remove the rear fan assembly, do the following:
a. Locate and disconnect the rear-fan-assembly cable from the rear-fan-assembly connector on the
system board.
b. Remove the rear fan assembly by breaking or cutting the rubber mounts and gently pulling the rear
fan assembly out of the chassis.
Figure 118. Removing the rear fan assembly
4. To install a new rear fan assembly, do the following:
.
Chapter 7 Hardware removal and installation
123