Lenovo ThinkStation P520 30BE User Manual page 104

6. To install a 2.5-inch storage drive into the conversion bracket, do the following:
a. Flex both sides of the bracket and align pins
holes in the new 2.5-inch storage drive.
b. Install the new 2.5-inch storage drive into the bracket. Do not touch the circuit board on the drive.
Figure 70. Installing the new 2.5-inch storage drive into the bracket
7. Ensure that the connectors on the storage drives are on the upper side. Slide the conversion bracket
with the new 2.5-inch storage drive into the storage drive bay until it snaps into position.
Figure 71. Installing the storage drive with conversion bracket into the storage drive bay
8. Connect the signal cable and the power cable to the new storage drive.
What to do next:
92
P520 User Guide
1 , 2 , 3 , and 4 on the bracket with the corresponding