Rear fan assembly
Prerequisite
Before you start, read Appendix A "Important safety information" on page 105 and print the following
instructions.
CAUTION:
Keep fingers and other parts of your body away from hazardous, moving parts. If you suffer an injury,
seek medical care immediately.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 52.
2. Disconnect the rear-fan-assembly cable from the rear-fan-assembly connector on the system board.
3. Remove the rear fan assembly by breaking or cutting the rubber mounts and gently pulling the rear fan
assembly out of the chassis.
4. Install a new rear fan assembly.
.
Chapter 8
CRU replacement
89