Rear fan assembly
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove the left side cover. See "Left side cover" on page 39.
2. Remove the CPU duct. See "CPU duct" on page 42.
Removal steps
Remove the rear fan assembly.
Blank bezel
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove the hard disk drive bracket beside the blank bezel. See "Hard disk drive in the front
access bay" on page 54.
Removal steps
Remove the blank bezel.
46
PX User Guide