Table of Contents
Advertisement
9. Attach the Wi-Fi antenna cable connectors
shown.
Figure 133. Installing the Wi-Fi antenna
10. Tighten the Wi-Fi antenna cable connectors to secure them to the rear of the computer.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 134.
Completing the parts replacement
CAUTION:
After replacing a CRU, reinstall all protective covers, including the computer cover, before connecting
power and operating the computer. This action is important to help prevent unexpected electrical
shock and help ensure the containment of an unexpected fire that could happen under extremely rare
conditions.
After completing the installation or replacement for all parts, reinstall the computer cover and reconnect
cables. Depending on the parts you installed or replaced, you might need to confirm the updated information
in the Setup Utility program. Refer to "Using the Setup Utility program" on page 35.
To reinstall the computer cover and reconnect cables to your computer, do the following:
134
P520 User Guide
1
to the corresponding Wi-Fi antenna connectors
2
as
Advertisement
Table of Contents
