Acnodes PCM8011 User Manual page 13

3-2 Connection
3-2-1 Cable connection
First of all, please make the power cable according to the Pin table (on Chapter 2-4). One end
(D38999/24WA98SN) to the terminal, another end to the DC power source. DC Input could be
9~36V @40wattage*.
*Wattage will be subject to change with different spec., please double check with your sales
representative for correct electric current.
3-2-2 Power-On the system
After power has been correctly connected, try to power on the unit by pressing the power
button in front. Without pre-installed OS, power indicator will be light with green color, and
system will ask for a booting device. For the booting device, please check chapter 4 in BIOS
settings. With pre-installed OS, system will automatically run with OS initialized procedure.
13