Table of Contents
Advertisement
4. Touch
again and again until the
display shows "Pyro" and the number
of the cleaning programme.
5. Touch
.
6. Touch
or
of the cleaning procedure:
Option
1
2
3
You can use the End function to
delay the start of the cleaning
procedure.
7. Touch
to activate the Pyrolysis
function.
12.5 Cleaning reminder
To remind you that the pyrolytic cleaning
is necessary, the cleaning reminder
symbol
flashes in the display after
each deactivation of the appliance for the
next 10 seconds.
The cleaning reminder
goes out:
• after the end of the
pyrolytic cleaning.
• when you deactivate it in
the basic settings. Refer
to "Using the settings
menu".
12.6 Cleaning the oven door
The oven door has four glass panels.
You can remove the oven door and the
internal glass panels to clean them.
to set the duration
Description
1:00 h for a
low degree
of dirt
1:30 h for a
usual degree
of dirt
2:30 h for a
high degree
of dirt
The oven door can close if
you try to remove the glass
panels before you remove
the oven door.
CAUTION!
Do not use the appliance
without the glass panels.
1. Fully open the door and identify the
hinge to the right side of the door.
2. Push the tightening component until
it pulls back.
3. Hold the pushed component with one
hand. Use a screwdriver with the
other hand to lift and turn the right
side hinge lever.
4. Identify the hinge to the left side of
the door.
ENGLISH
29
Advertisement
Table of Contents
