Table of Contents
Advertisement
Calling a single station (Individual Call)
To call a single station with DSC, follow these steps:
1.
Scroll thorugh soft keys to select CALL soft key. CALL menu displays.
2.
The radio displays the ships listed in your Individual Directory (see page E-30).
Select the ship you want to call and choose SELECT.
3.
The radio displays the ship you selected to transmit to and the transmission channel.
Select SEND.
4.
The radio displays the ship called and the elapsed time since the call was
transmitted.
5.
The radio automatically switches to channel 70 to transmit the call request.
When the other station accepts the call, both radios switch to the selected
x
response channel for voice transmission.
If the other station did not respond on the channel you selected, you can select
x
RESEND or BACK.
Calling a particular group of ships (Group Call)
Group calling calls all the ships that share your group MMSI. You must have a group MMSI
programmed into the radio to make a group call, and the ships you are calling must have
this same group MMSI programmed into their radios in the group directory (see page
E-31).
1.
Scroll thorugh soft keys to select CALL soft key. CALL menu displays.
2.
Select GROUP CALL.
3.
A list of groups displays (see page E-31 to create groups). Press ▲ and ▼ to scroll
through the list and select the group to call.
All ships call
Individual
Uniden MHS335BT Radio Owner's Manual
Group
call
call
All ships call
E-33
Advertisement
Table of Contents
