Brakingsystemfluidtopup - PIAGGIO X7 125 2012 Manual

03_21

Brakingsystemfluidtopup (03_21)

Proceed as follows:
1. Remove the rear-view mirrors.
2. Working from both sides of the vehicle, undo the three screws «A» and remove the
front frame.
3. Remove the windshield by undoing the four screws «B».
4. Undo screw «C» and remove the front handlebar cover «D» partially.
5. Remove cover «F» by loosening the two screws «E» and refill, without exceeding
the maximum level, adding prescribed fluid type only.
This operation applies to top up the rear brake pump. Follow the same procedure for
the front one.
Under normal climatic conditions, replace fluid as indicated in the scheduled mainte-
nance tables.
This operation must be carried out by trained technicians; take your scooter to an
authorised Service Centre or Dealer.
52