Fujitsu PRIMERGY RX200 S5 Operating Manual page 44

Installing/removing the server in/from the rack
Removing the outer telescopic rail
Figure 4: Removing the outer telescopic rail
Ê Extend the telescopic rail fully (1).
Ê Unlock the outer telescopic rail and remove it.
With fully-extendable rails (a): Press the locking lever to release the server
rail.
With partially extendable rails (b): Press the release spring to release the
server rail.
Ê Repeat the steps with the second telescopic rail.
44
a
1
Operating Manual
Hardware installation
b
1
RX200 S5