Fujitsu PRIMERGY RX200 S5 Operating Manual page 4

Contents
5 Starting up and operation . . . . . . . . . . . . . . . . . . . . 55
5.1 Controls and indicators . . . . . . . . . . . . . . . . . . . . . 55
5.1.1 Front of server
5.1.2 Rear of server . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
5.1.3 Indicators of the hot-plug system fans . . . . . . . . . . . . . . 64
5.2 Switching the server on and off . . . . . . . . . . . . . . . . 65
5.3 Configuring the server . . . . . . . . . . . . . . . . . . . . . 67
5.3.1 Configuring the onboard SATA controller . . . . . . . . . . . . . 67
5.3.2 Configuring the SAS/SATA RAID controller . . . . . . . . . . . . 67
5.3.3 Configuring the server and installing the operating system with the
ServerView Installation Manager . . . . . . . . . . . . . . . . . 68
5.3.4 Configuring the server and installing the operating system without
ServerView Installation Manager . . . . . . . . . . . . . . . . . 69
5.4 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . . 70
6 Property and data protection . . . . . . . . . . . . . . . . . . 71
6.1 BIOS Setup security functions . . . . . . . . . . . . . . . . . 71
7 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 73
7.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 73
7.2 Server switches itself off . . . . . . . . . . . . . . . . . . . . 74
7.3 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 74
7.4 Flickering stripes on monitor screen
7.5 No screen display or display drifts . . . . . . . . . . . . . . . 75
7.6 Incorrect date and time . . . . . . . . . . . . . . . . . . . . . 76
7.7 System will not boot . . . . . . . . . . . . . . . . . . . . . . . 76
7.8 Hard disk drive error messages at system boot . . . . . . . . 76
7.9 Added drive reported as defective . . . . . . . . . . . . . . . 77
7.10 Error message on screen . . . . . . . . . . . . . . . . . . . . 77
. . . . . . . . . . . . . . . . . . . . . . . . . . 55
Operating Manual
. . . . . . . . . . . . . 75
RX200 S5