Table of Contents
Advertisement
STEP 4
1.
Gather HARDWARE FOR STEP 4.
2.
Slide CONSOLE MAST COVER RIGHT AND LEFT (67, 66) up the uprights. Secure them with
8 SHEET METAL SCREWS (142)
3.
Place the HANDRAIL SUPPORT (119) between the LEFT AND RIGHT UPRIGHTS (5, 4) and use the
COMBINATION ALLEN WRENCH & PHILLIPS HEAD SCREWDRIVER (131) to tighten 4 BUTTON
HEAD SOCKET BOLTS (150). Install the BEVERAGE HOLDER (121) onto the HANDRAILS
SUPPORT (119).
Note: Please tighten all screws after all components have been assembled.
HARDWARE
#150. 5/16" x 3/4"
Button Head Socket
Bolt (4 pcs)
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
using the PHILLIPS HEAD SCREWDRIVER (148).
#142. 3.5 x 16mm
Sheet Metal Screw
(8 pcs)
12
Dyaco Canada Inc. 2016
Advertisement
Table of Contents
