Operating the
Handwarmers
Operate the handwarmers as follows:
•
Press the switch to the O
handwarmers.
•
Press the switch to the O
handwarmers.
Figure 17
1. On/Off switch
2. O
position
N
During Operation
Starting the Machine
1.
Ensure that the battery pack(s) are installed in
the machine; refer to
(page
16).
2.
Insert the electric-start key into the control panel
3.
Turn the key to the R
machine
(Figure
Figure 18
1. Key switch in O
position
N
position to turn on the
N
position to turn off the
FF
3. O
position
FF
Installing the Battery Pack
position to turn on the
UN
18).
Activating ECO Mode
Using ECO mode may extend battery life by reducing
rotor speed; use ECO mode whenever you are
moving light snow, or moving snow a short distance.
Activate ECO mode using the ECO button as shown
in
Figure
19.
1. ECO mode button
g026460
g347864
17
Figure 19
g347866