Table of Contents
Advertisement
Shutting Off the Engine
Important:
Wait for all moving parts to stop before leaving the operating position.
Operating the
Handwarmers
Operate the handwarmers as follows:
•
Press the switch to the O
handwarmers.
•
Press the switch to the O
handwarmers.
Figure 17
1. On/Off switch
2. O
position
N
position to turn on the
N
position to turn off the
FF
g026460
3. O
position
FF
Figure 16
Operating the Traction
Drive
CAUTION
If the traction drive is not properly adjusted,
the machine may move in the direction
opposite of what you intended, causing injury
and/or property damage.
Carefully check the traction drive and adjust it
properly, if necessary.
Important:
If the machine moves when the
traction lever is in the released position, check the
traction cable; refer to
the Traction Cable (page 19)
to an Authorized Service Dealer for service.
Important:
To operate the traction drive, you
must operate the machine with the self-propel
feature engaged.
1.
To engage the traction drive, squeeze the left
(traction) lever to the handgrip
2.
To stop the traction drive, release the traction
lever.
13
Checking and Adjusting
or take the machine
(Figure
18).
Figure 18
g252411
g322974
Advertisement
Table of Contents
