Operation; Clean Air & Humidify Mode; Clean Air Mode - Sharp Plasmacluster KC-30TX1 Operation Manual

OPERATION

Clean Air & Humidify Mode
The operation in this mode is generally recommended. (Humidity setting cannot be adjusted.)
without the humidifying function.
Caution
However, the humidity could be too high or too low depending on
If humidity is too low: Set the fan speed to "MAX" or "MED" for operation.
If humidity is too high: Operate the unit in the clean air mode.
* When the fan speed is set to "AUTO" or "POLLEN", the unit stops
humidifying air when it reaches the optimal humidity level and
the Humidify Indicator Light turns OFF.

Clean Air Mode

Suitable during rainy seasons or when the humidity is high. (operable without filling the Water Tank)
E-10
Fill up the Water
Tank with tap
water
Water tank
Select a preferred
Beep
fan speed
Beepー
Beep
Select a preferred
fan speed
Beepー
Insert the plug into
the outlet.
E-9
page
after the plug is inserted into the outlet, set
the fan speed to "AUTO" and
Plasmacluster ion to "ON".
the unit with the same setting as the
previous one.
E-11
page
after the plug is inserted into the outlet, set
the fan speed to "AUTO" and
Plasmacluster ion to "ON".
the unit with the same setting as the
E-11
page
previous one.
Humidify Indicator Light
Green Humidifying
Not humidifying *
Off
Red
Supply water
(Flashing)
Room temperature Optimal humidity
Humidify Indicator Light
Off Not humidifying