Esc % N; Esc & Y C1 C2 [X1 D1 - Bematech LR1100 Programming Manual

 Sets the distance from the beginning of the line to the position at which subsequent
[Description]
 The distance from the beginning of the line to the print position is [(nL + nH
 Settings outside the specified printable area are ignored.
[Notes]
 In standard mode, the horizontal motion unit (x) is used.
[Reference] ESC \, GS $, GS \

ESC % n

[Name] Select/cancel user-defined character set
[Format] ASCII
Hex
Decimal
0 n 255
[Range]
[Description] Selects or cancels the user-defined character set.
 When the LSB of n is 0, the user-defined character set is canceled.
 When the LSB of n is 1, the user-defined character set is selected.
 When the user-defined character set is canceled, the built-in character set is
[Notes]
 n is available only for the least significant bit.
[Default] n = 0
[Reference] ESC &, ESC ?
ESC & y c1 c2 [x1 d1...d(y
[Name] Define user-defined characters
[Format] ASCII
Hex
Decimal
[Range] y = 3
32 c1 c2 126
0 x 12 (when Font A (12×24) is selected)
0 x 9 (when Font B (9×17) is selected)
0 d1 ... d(y × xk) 255
[Description] Defines user-defined characters.
 y specifies the number of bytes in the vertical direction.
 c1 specifies the beginning character code for the definition, and c2 specifies the
 x specifies the number of dots in the horizontal direction.
characters are to be printed.
0.125 mm].
ESC % n
1B 25 n
27 37 n
automatically selected.
x1)]...[xk d1...d(y

ESC & y c1 c2 [x1 d1...d(y × x1)]...[xk d1...d(y × xk)]
26 y c1 c2 [x1 d1...d(y × x1)]...[xk d1...d(y × xk)]
1B
27 38 y c1 c2 [x1 d1...d(y × x1)]...[xk d1...d(y × xk)]
final code.
LR1100 Programming Manual V1.2
xk)]

256)×
×