Kanji Control Commands; Fs ! N - Bematech LR1100 Programming Manual

KANJI CONTROL COMMANDS

FS ! n

[Name] Set print mode(s) for Kanji characters
[Format] ASCII
Hex
Decimal
0 n 255
[Range]
[Description] Sets the print mode for Kanji characters, using n as follows:
 When both double-width and double-height modes are set (including right- and left-
[Notes]
 The printer can underline all characters (including right- and left-side character
 The thickness of the underline is that specified by FS , regardless of the character
 When some of the characters in a line are double or more height, all thecharacters
 It is possible to emphasize the Kanji character using GS !; the setting of the last
 It is possible to turn underline mode on or off using FS , and the setting of the last
[Default] n = 0
FS , GS !
[Reference]
FS ! n
1C 21 n
28 33 n
Bit Off/On Hex
－ －
0
－ －
1
2 Off 00
On 04
3 Off 00
On 08
－ －
4
－ －
5
－ －
6
7 Off 00
On 80
side character spacing), quadruple-size characters are printed.
spacing), but cannot underline the space set by HT and 90° clockwise-rotated
characters.
size.
on the line are aligned at the baseline.
received command is effective.
received command is effective.
LR1100 Programming Manual V1.2
Decimal Function
－
Undefined.
－
Undefined.
0 Double-width mode is OFF.
4 Double-width mode is ON.
0 Double-height mode is OFF.
8 Double-height mode is ON.
－
Undefined.
－
Undefined.
－
Undefined.
0 Underline mode is OFF.
128 Underline mode is ON.