Other Features; Account Code - Mitel MiVoice 4222 Office Directions For Use Manual

M V 4222 O
I OICE FFICE
9
9.1
9.1.1
9.2
9.2.1
9.2.2
9.2.3
43
(DBC 222) M V
FOR I OICE

OTHER FEATURES

ACCOUNT CODE

GENERAL
The feature account code provides two different functions:
• Charge a call to an account code instead of charging it to the calling extension's
number.
• Prevent unauthorized telecommunication usage by forcing the user to dial an
account code before dialing an external number.
Extensions and the external numbers for Least cost routing can be initiated with
account code categories. With these two categories it is possible to decide if the user
will have forced or optional account code dialing.
Forced
means that the user must have dialed a valid account code before the destination
number otherwise the call is rejected.
Optional
means that it is not necessary with an account code for the call. In this case the
call is always accepted.
The procedure for account code normally has to be dialed before the wanted number.
It is also possible to tie an account code to an ongoing call, both incoming and outgoing.
Any previous stored account code will then be overwritten.
ADDITIONAL DIRECTORY NUMBER, ADN
You can be assigned one or more additional directory numbers. These are
programmed on free function keys on your telephone. When using the additional line,
use the following procedures:
TO RECEIVE A CALL
Incoming call to an additional line-key is indicated by a flashing lamp (the additional
line-key's lamp) and a ringing signal is heard.
• Lift the handset (dial tone).
• Press the additional line-key.
TO RECEIVE A CALL IN HANDSFREE MODE
Not applicable.
TO TERMINATE THE CALL
• Press the Clear-key or replace handset.
MX-ONE
2/1553-ANF 901 54 Uen F7 2018-12-03