2-2. Connecting the Signal Cable
NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable (MD-C87
enclosed)
Signal Cable (MD-C87
enclosed) + Adapter*
Digital Input
Signal Cable (FD-C39
enclosed)
NOTE
• The monitor is not compatible with a Power Mac G4/G4 Cube ADC (Apple
Display Connector)
Signal Cable
Signal Cable
Power Cord
Connector
Video Output
Connector / D-Sub mini
15 pin
Input Connector
(monitor) / D-Sub mini
15 pin
Video Output
Connector / D-Sub 15
pin
Input Connector
(monitor) / D-Sub mini
15 pin
Connector
Video Output
Connector / DVI
Input Connector
(monitor) / DVI
2. CABLE CONNECTION
English
PC
•
Standard graphics card
•
Power Macintosh G3 (Blue &
White) / Power Mac G4
(VGA)
•
Macintosh
*Macintosh Adapter (Optional)
PC
•
Digital graphics board
•
Power Mac G4 (DVI)
13