Connecting Two Pcs To The Monitor - Eizo FlexScan L885 User Manual

English

2-3. Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the
back of the monitor.
Connecting Examples
(Ex.1) Digital
(Ex.2) Analog
NOTE
• When using FD-C16, plug the D-Sub mini 15 pin connector to the computer and
DVI-I connector to the monitor. Wrong connection causes no picture problem.
Selecting the Active Input
The Input Signal Selection Button on the control panel can be used to select either
SIGNAL 1 or SIGNAL 2 as the active input at any time. Every time the button is
pressed, the input changes. When switching the signal, the kind of the input signal
(Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of
the screen.
16
2. CABLE CONNECTION
DVI-I Input Connector
(SIGNAL 1)
PC 1
DVI Signal Cable
(FD-C39 enclosed)
D-Sub Signal Cable
mini 15
(FD-C16 optional)
pin
Input Signal Selection Button
SIGNAL
AUTO ENTER
1 - 2
D-Sub 15 pin mini
Input Connector
(SIGNAL 2)
Signal Cable
(MD-C87 enclosed)
Signal Cable
(MD-C87 enclosed)
PC 2
D-Sub Analog
mini
15 pin
D-Sub Analog
mini
15 pin