Eizo FlexScan L360 User Manual
  1. Manuals
  2. Brands
  3. Eizo Manuals
  4. Monitor
  5. FlexScan L360
  6. User manual
Eizo FlexScan L360 User Manual

Eizo FlexScan L360 User Manual

Eizo nanao flexscan color lcd monitor user's manual l360
Hide thumbs Also See for FlexScan L360:
Table of Contents

Advertisement

Quick Links

Download this manual
E

Advertisement

Table of Contents
loading

Related Manuals for Eizo FlexScan L360

Summary of Contents for Eizo FlexScan L360

  • Page 2: Table Of Contents

    CONTENTS PRECAUTIONS __________________________ 4 INTRODUCTION ________________________ 10 About this Manual ... 10 Package Contents ... 10 Controls & Connectors ... 12 1 INSTALLATION ______________________ 16 1-1 Connecting up ... 16 PC Settings ... 16 Connecting the cables (Desktop Stand Type) ... 17 Connecting the cables (Free Mount Type) ...
  • Page 3 Preset Timing Chart ... iii Dimensions ... vi Copyright© 1999 by EIZO NANAO CORPORATION. All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.

  • Page 4: Precautions

    (refer to the figure above). The diagrams of the LCD shown in this manual represent both the desktop stand type and the free mount type of L360 unless the type is clearly shown. PRECAUTIONS Risk of electric shock. Do not open.
  • Page 5 This manual uses the safety symbols below. They denote critical information. Please read them carefully. Indicates a prohibited action. Indicates to ground for safety. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage.
  • Page 6 • Do not touch a damaged LCD panel directly with bare hands. Use protective gloves whenever handling a damaged panel. The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash thoroughly.
  • Page 7 • Keep the plastic packing bags away from children and infants. Plastic bags can be dangerous. To avoid danger of suffocation, keep the bag away from babies and children. • Keep power terminal covers for the optional peripheral unit away from children and infants. Children and infants may accidentally swallow the covers and choke.
  • Page 8 • Periodically clean the area around the plug. Build-up of dust, water, or oil on the plug may result in fire. • Please keep the LCD monitor in a dust-free environment. Dust accumulation within the LCD monitor may result in fire or equipment failure.
  • Page 9 • Do not use the power unit hanging in midair. Place it on a solid, flat surface (free mount type only). Do not drop the power unit. Hanging the power unit in midair may result in fire or electric shock. •...

  • Page 10: Introduction

    “ScreenManager Quick Reference” guide has been included which shows how to implement basic adjustments with the ScreenManager utility. • This manual applies to the EIZO monitor types: The desktop stand type and the free mount type. Please note that there are some points which vary according to the type.
  • Page 11 • If any of the above-listed items are missing or damaged, please contact your local dealer for assistance. • We recommend that you retain the original packing materials in case of future need. Signal Cable Power Cord (MD-C91) EIZO LCD Utility Disk (for Windows/Dos/ Macintosh) Power Unit User’s Manual ScreenManager...

  • Page 12: Controls & Connectors

    Controls & Connectors (Desktop Stand Type) Front (1) Power Terminal Covers for the Optional Peripheral (2)Input Signal Selection Button Selects one of two D-Sub connectors as the active input. This feature is only used when two computers are connected to the LCD monitor. (3) Auto Adjustment Button Automatically centers the displayed image.
  • Page 13 Rear (1)Connector Cover Remove the connector cover of the LCD monitor to connect the signal cables. (2)Rear Cover Remove the rear cover of the LCD monitor to connect the signal cables. (3)D-Sub Connector Holder Used to prevent the D-Sub signal cables from becoming loose or disconnected.
  • Page 14 Controls & Connectors (Free Mount Type) Front (1) Power terminal covers for the optional peripheral (2) Input Signal Selection Button Selects one of two D-Sub connectors as the active input. This feature is only used when two computers are connected to the LCD monitor. (3) Auto Adjustment Button Automatically centers the displayed image.
  • Page 15 Rear (1) D-Sub Connector Holder Used to prevent the D-Sub signal cables from becoming loose or disconnected. (2) 2 x D-Sub mini 15 pin Input Connectors (Input Signal 1 and 2) (3) DC IN Connects to the enclosed power unit. (4) Maintenance Port Service use only.

  • Page 16: Installation

    Desktop Stand Type : Free Mount Type: PC Settings Before connecting your PC to the L360 LCD monitor, change the display screen settings (resolution and frequency) in accordance with those below. • The maximum resolution of this LCD monitor is 1024 x 768 at a maximum fV of 75 Hz.

  • Page 17: Connecting The Cables (Desktop Stand Type)

    Connecting the Cables (Desktop Stand Type) (1)Be sure that the power switches of both the PC and the LCD monitor are OFF. (2)Remove the D-Sub connector holder. a) Hand-loosen the screws at the center of the holder. b) Pull the holder away while squeezing both sides of the holder. (3)Plug the signal cable (which is marked “LCD”) into the D-Sub connector (Signal 1) at the rear of the monitor.
  • Page 18 Standard PC graphics board Macintosh Please connect the optional Macintosh adapter to the PC before attaching the signal cable. (6)Replacing the connector cover and the rear cover. a) To close easily, the LCD monitor should be tilted forward as shown in the diagram.
  • Page 19 c) Insert the rear cover into the inlets at the bottom of the stand. d)Close the rear cover while pushing the push buttons on the top. buttons (7) Plug the power cord into the power connector in the rear of the LCD monitor.
  • Page 20 (1)To open easily the LCD monitor should be tilted forward as shown in the diagram. (2) Pull the rear cover clear while pushing the push buttons on the top. (3) Pull down and remove the connector cover. INSTALLATION...
  • Page 21 (Example) PC compatible MD-C91 The EIZO L360 has two video input signal connectors (2 x D-sub mini 15 pin). The priority switch system allows the user to assign priority to either input signal. • Use the specified optional cable: MD-C91 only or with Macintosh adapter when connecting the second computer to the monitor.

  • Page 22: Connecting The Cables (Free Mount Type)

    Connecting the Cables (Free Mount Type) (1)Be sure that the power switches of both the PC and the power unit are OFF. Lay the LCD monitor as shown below. (2)Plug the power unit into the power connector in the rear of the LCD monitor.
  • Page 23 (4)Plug the signal cable (which is marked “LCD”) into the D-Sub connector (Signal 1) at the rear of the monitor. Please ensure that the arrow mark on the casing of the connector is visible when connecting. See note. When connecting the signal cable, check that the shape of the cable connector matches the shape on the LCD monitor.
  • Page 24 • In case of using this LCD monitor with an arm-stand in an office workspace, the arm-stand shall be chosen and used carefully: - Use only an approved arm-stand (e.g. GS). - The arm-stand shall have sufficient stability (mechanical firmness) due to the load with this monitor included the optional parts which we recommend.
  • Page 25 Macintosh Please connect the optional Macintosh adapter to the PC before attaching the signal cable. (8) Plug the power cord into the power unit, and plug the other into a power outlet. • In case of setting the plural free mount type monitors, please be sure to observe the followings.
  • Page 26 Connecting two PCs to the Monitor (Example) PC compatible The EIZO L360 has two video input signal connectors (2 x D-sub mini 15 pin). The priority switch system allows the user to assign priority to either input signal. • Use the specified optional cable: MD-C91 only or with Macintosh adapter when connecting the second computer to the monitor.

  • Page 27: Using The Screenmanager

    2 USING THE SCREENMANAGER 2-1 How to use the ScreenManager About ScreenManager As shown on the display, the ScreenManager is used to adjust the LCD monitor. Adjustments are made using the Enter and Control buttons (up, down, right and left) located on the front panel. ScreenManager Menus ScreenManager consists of a main menu and six sub menus: “Screen”, “Color”, “PowerManager”, “Others”, “Information”...
  • Page 28 Sub menus Icon Menus Screen menu Color menu PowerManager menu Others menu USING THE SCREENMANAGER Functions Each display mode can have various screen parameters adjusted to enhance viewing. There are: * Clock * Phase * Position * Resolution * Contrast / Brightness Use this menu to select color mode: 1, 2 or 3.
  • Page 29 Icon Menus Information menu Language menu Functions Use this feature to review the current ScreenManager settings. The menu contains four pages. Pushing the Enter button selects each page in order. The information displayed for each page is as follows: * Page 1: "Screen" menu settings “Screen”...

  • Page 30: How To Use The Screenmanager

    How to use the ScreenManager Entering the ScreenManager Push the Enter button once to display the main menu of the ScreenManager. Enter the Settings (1) To enter any sub menu icon, highlight the desired icon by using the Control buttons (up, down, right and left) and push the Enter button. The sub menu appears.

  • Page 31: Adjustment Lock

    • Return & Exit icons To return to the main menu from the sub menu or exit the ScreenManager, select this icon and push the Enter button. Shortcut keys Brightness and contrast can be adjusted directly without any need to enter the ScreenManager.

  • Page 32: Screen Adjustment

    2-2 Screen Adjustment About Screen Adjustments Entering the ScreenMananger, select the “Screen” icon and push the Enter button to show the “Screen” menu. “Screen” adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode.

  • Page 33: Adjustment Procedure

    Adjustment Procedure Overview • Allow the LCD monitor to warm up for at least 20 minutes before making adjustments. • For maximum viewing comfort, it is suggested that the monitor be tilted to eye level. • To make adjustment easily, install and run the “Screen Adjustment Program”...
  • Page 34 Procedure Please adjust the screen using the following procedure. (1) Having read the “readme.txt” file, install and run the “Screen Adjustment Program” in the utility disk. Step by step adjustment is provided by the wizard guide. Follow the wizard or the procedures (2) to (8) below. •...
  • Page 35 (3) Entering the ScreenManager “Screen” menu. (4) “Clock” Adjustment a) Select the “Clock” icon and push the Enter button to enter the “Clock” menu. b) If vertical bars of distortion on the screen appear, these can be eliminated by adjusting the right and left buttons. Then look at the illustration and the explanation below.
  • Page 36 (5) “Phase” Adjustment a) Select the “Phase” icon and push the Enter button to show the “Phase” menu.” b) If horizontal bars appear, these can be eliminated by adjusting the right and left buttons. c) After finishing the adjustment, push the Enter button to memorize the settings and return to the “Screen”...
  • Page 37 (7) Confirm the “Resolution”. a) Select the “Resolution” icon and push the Enter button to enter the “Resolution” menu. b) Confirm if the resolution now being displayed is the same as the input resolution. If it is not, adjust the vertical resolution using the up and down buttons and adjust the horizontal resolution using the right and left buttons.

  • Page 38: Screen Adjustment Features

    1. Clock Adjustment This feature decreases the vertical bars of distortion. The EIZO L360 LCD monitor is designed for analog input signals from a standard graphics board. The analog input signal is converted to a digital signal by the LCD circuitry. To convert the signal correctly, the LCD monitor needs to produce the same number of clock pulses as the dot clock of the graphics system.
  • Page 39 2. Phase Adjustment This feature eliminates the horizontal bars of distortion. The phase adjustment decides the sampling point for converting the analog input signal to a digital signal. Adjusting the “Phase” after the “Clock” adjustment will produce a clear screen. 3.
  • Page 40 When pushing the up or right buttons, the resolution is increased. When pushing the down or left buttons, the resolution is decreased. • The maximum resolution for the EIZO L360 LCD monitor is 1024 x 768. 5. Contrast Adjustment This feature controls the contrast of the screen.
  • Page 41 * In the case of the percentage color flickering between orange and white, please note that this is not an error but actually the most optimum adjustment point. * The brightness of the entire screen is controlled by changing the “Brightness”...

  • Page 42: Color Adjustment

    2-3 Color Adjustment About Color Adjustments Entering the ScreenManager, select the “Color” icon and push the enter button to show the “Color” menu. The ScreenManager “Color” menu provides 3 color setting modes; 1, 2, and 3. You can also adjust the color settings for each mode and store them for future use.

  • Page 43: Custom Color Adjustments

    Custom Color Adjustments By adjusting the red, green and blue color tones for each mode, custom colors can be defined. Please use this function when high precision color adjustment is required. Procedure • Before you attempt to change the colors, always start with the color settings set to the default setting by using the “Reset”...
  • Page 44 • After making the color settings, re-adjust the contrast to get the best definition and color intensity for the displayed image. • “Reset” You can recall the default color gain setting for the current color mode (1, 2, 3) using the “Reset” icon. •...

  • Page 45: Power-Save Setup

    Even if the monitor is in a power saving mode, it will return to a normal display immediately when the mouse or keyboard is operated. The EIZO PowerManager functions comply with the VESA DPMS standard and the EPA’s Energy Star EIZO MPMS.

  • Page 46: Setup Procedure

    There are two power saving settings for the monitor. “VESA DPMS” system works with the VESA DPMS signal. “EIZO MPMS” system works with a screen saver software and Energy Saver for Macintosh which blanks the screen (totally black screen). Set the monitor to match the PC’s power saving software, as follows.
  • Page 47 VESA DPMS System 1) First, make the appropriate settings for the PC. (See note, page 46.) 2) Then select “VESA DPMS”. 3) Set the delay period, which is the interval that the monitor will wait after receiving a power saving signal from the PC, before entering into a power saving mode.
  • Page 48 EIZO MPMS System 1) First make the appropriate ScreenSaver settings (Macintosh/Energy Saver) for the PC. 2) Then select “EIZO MPMS”. 3) Set the delay time. This is the interval between the time that the ScreenSaver (Macintosh/EnergySaver) blanks the screen and the time that the monitor enters power saving mode.
  • Page 49 What is EIZO MPMS? EIZO MPMS, "EIZO Monitor PowerManager Signaling", also enables to execute power saving at the monitor side. EIZO MPMS recognizes the video signals from the PC when the PC is in a power saving mode, and reduces energy consumption of the monitor.

  • Page 50: Other Settings

    2-5 Other Settings About Other Settings Entering the ScreenManager, select the “Others” icon and push the Enter button to show the “Others” menu. All of the icons shown in the ScreenManager “Others” menu are described below. Screen Size This function shows the image in its original size or enlarged to fit the full screen of the LCD panel.
  • Page 51 What is the “Screen Size” setup function? The LCD panel consists of a fixed number of pixel elements which are illuminated to form the screen image. The EIZO L360 display panel consists of the following pixel elements: 1024 horizontal pixels and 768 vertical pixels.

  • Page 52: Color Enhancer

    • The default setting is “On” (true color (16 million)). What is the “Color Enhancer” function? The maximum displayable colors of the LCD panel used in the EIZO L360 monitor is 262,144. However, by turning on the “Color En- hancer” function the panel can expand the displayable colors to true color (16 million).

  • Page 53: Border Intensity

    Border Intensity This function is used for changing the brightness of the black area sur- rounding the displayed image. Adjustment Procedure Please adjust the border intensity using the following procedure: (1)Select the “Border Intensity” icon and push the Enter button to display the adjustment menu.

  • Page 54: Input Priority

    Input Priority This function is used to select which PC will have priority to control the monitor when utilizing two PCs. As you can see in the picture, there are three settings available: “Signal 1”, “Signal 2” or “Manual”. The default priority setting is “Signal 1”.

  • Page 55: Off Timer

    1 The Input Priority function does not automatically re-activate when the monitor has been in the power saving mode. 2 The Input selection button on the front panel can be used to select either Signal 1 or Signal 2 as the active input at any time. Procedure for Input Priority Selection Please set the Input priority using the following procedure: (1)Select the “Input priority”...
  • Page 56 Setup Procedure (1) Select the “Off Timer” icon and press the Enter button to display “Off Timer” select menu. (2) Select “Enable” and press the enter button. (3) Press the right/left key to adjust how long (1 to 23 hours) the monitor should be in the “On Period”.

  • Page 57: Beep

    Beep Use this feature to set the beeper On or Off. If the beeper is On, the LCD monitor will generate beep signals as defined below. If the beeper is Off, the monitor will not beep. Short beep • ScreenManager item selected. •...

  • Page 58: Menu Position

    Menu Position Use this function to adjust the position of the ScreenManager menu. Procedure for Menu Position Selection Please set the Menu Position using the following procedure: (1)Select the “Menu Position” icon and push the Enter button to display the adjustment menu. (2)Set the position using the right, left, up and down buttons.
  • Page 59 Procedure for Reset Selection Please reset the default using the following procedure: (1)Select the “Reset” icon and push the Enter button to show the adjust- ment menu. (2)Select “Reset” using the up and down buttons. A confirmation message will appear. (3) Push the Enter button to proceed and return to the “Others”...

  • Page 60: Making Use Of Usb (Desktop Stand Type Only)

    (For Windows 98) 1) Connect the upstream port of the monitor to the downstream port of the USB compliant PC or another hub using the EIZO USB cable (MD-C93). • When connecting the USB cable, check that the shape of the connector at the cable side matches the shape at the connecting side.
  • Page 61 There is no need to install any software to utilize the USB hub function when connecting a USB compliant PC (or another USB hub) with the USB cable (MD-C93). Connect the USB compliant peripherals to the downstream ports of the monitor: (Example of connection) EIZO USB Cable Monitor (MD-C93) Digital Camera...

  • Page 62: Troubleshooting

    If the problem is solved by doing this, contact an EIZO dealer. The power button of the APPLE keyboard does not operate if it is connected to the EIZO USB Hub. Please connect the keyboard directly with the PC. Refer to the instruction...

  • Page 63: Troubleshooting

    4 TROUBLESHOOTING 4-1 Troubleshooting This page presents problems that can be corrected by the user. If a problem persists even after applying the suggested remedies, contact an EIZO dealer. n No picture Problems 1) Indicator status: OFF 2) Indicator status: GREEN...

  • Page 64: Imaging Problems

    • Whenever an error signal message appears, the signal frequency will be displayed in red. • Error messages will remain on the screen for 30 seconds, and then disappear. An error message may not appear at all if the signal frequency is extremely high or extremely low.
  • Page 65 Others Problems 1) The screen is unable to be enlarged. 2) The monitor beeps. 3) The EIZO LCD Utility Disk is unable to be opened. (Macintosh users only). 4) • The Enter button does not operate. • The Auto adjustment button does not operate.
  • Page 66 Problems 4) The Auto adjustment button does not work properly. 5) Frequency does not change after installing “Monitor information file” in the attached utility disk on Windows 95. • For problems with USB function, refer to the troubleshooting on page 62. TROUBLESHOOTING Points to check with possible solutions The Auto adjustment function is intended for use...

  • Page 67: Cleaning

    5 CLEANING WARNING • Keep liquids away from the monitor. Spillage into the cabinet may result in fire, electric shock, or equip- ment damage. If an object or liquid falls/spills into the cabinet, unplug the monitor immediately. Have the unit checked by a qualified service engineer before using it again.

  • Page 68: Specifications

    50 Hz-85 Hz (Automatic) (1024 x 768: up to 75 Hz) (Viewable Image Size: 380 mm (14.7”)) 100-120/220-240 VAC ± 10%, 50/60 Hz, 1.1/0.6 A 27 W/50 W (with USB hub and the EIZO optional peripheral attached) Less than 3 W* (* When the USB hub is not connected)
  • Page 69 50 Hz-85 Hz (Automatic) (1024 x 768: up to 75 Hz) (Viewable Image Size: 380 mm(14.7”)) 100-120/220-240 VAC ± 10%, 50/60 Hz, 0.4/0.2 A 27 W 35 W (with the EIZO optional peripheral attached) Less than 3 W 2 x D-Sub mini 15-pin 16 million colors / 262,144 colors * This can be set by the user through the ScreenManager “Color Enhancer”...

  • Page 71: Appendix

    APPENDIX Pin Assignment Pin-Belegung Affectation des Broches 2 x D-Sub mini 15 pin connectors USB ports (Desktop Stand Type Only) Upstream (Series B connector) APPENDIX Pin No. Signal Red video Green video Blue video Ground No pin Red ground Green ground Blue ground Downstream (Series A connector)

  • Page 72: Preset Timing Chart

    Preset Timing Chart Timing-Übersichten Synchronisation des Signaux Based on the signal diagram shown below, 14 factory presets have been registered in the monitor's microprocessor. Der integrierte Mikroprozessor des Monitors unterstützt 14 werkseitige Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme). 14 signaux ont été enregistrés en usine dans le microprocesseur du moniteur, conformément au diagramme de synchronisation ci-dessous.
  • Page 73 Mode Dot Clock 640 x 480 25.175 MHz 31.468 kHz 720 x 400 28.322 MHz 31.468 kHz VESA 640 x 480 31.5 MHz 37.86 kHz VESA 640 x 480 31.5 MHz 37.50 kHz VESA 640 x 480 36.0 MHz 43.27 kHz VESA 800 x 600 36.0 MHz...
  • Page 74 C: Back Porch D: Blanking Period µs/Dot ms/Line µs/Dot 1.907 / 48 1.048 / 33 6.356 / 156 1.907 / 54 1.111 / 35 6356 / 180 3.810 / 120 0.528 / 20 5.587 / 176 3.810 / 120 0.427 / 16 6.349 / 200 2.222 / 80 0.578 / 25...

  • Page 75: Dimensions

    Dimensions Abmessungen Dimensions Desktop Stand Type LCD Monitor 12.4 FRONT VIEW VORDERANSICHT VUE DE FACE 15° TOP VIEW DRAUFSICHT VUE D'EN HAUT APPENDIX (15.6) 37.5 45.5 (1.7) 15 8 28 ) 40 4 15° (inches) 18° 3° 10.5 (1.5 (6 9 SIDE VIEW SEITENANSICHT VUE DE COTE...
  • Page 76 Free Mount Type LCD Monitor (15.6) 12.4 FRONT VIEW VORDERANSICHT VUE DE FACE TOP VIEW DRAUFSICHT VUE D'EN HAUT 37.5 45.5 (1.7) SIDE VIEW SEITENANSICHT VUE DE COTE (inches) APPENDIX...

  • Page 77: Why Do We Have Environmentally Labelled Computers

    The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO’99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.com/ Except for Black-Cabinet L360...

  • Page 78: Environmental Requirements

    Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous system and in higher doses, causes lead poisoning. The relevant TCO’99 requirement permits the inclusion of lead since no replacement has yet been developed. Except for Black-Cabinet L360...
  • Page 79 Untergrund zu verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.) Recycle Auskunft Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem Partner von Roll MBB Recycling GmbH. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden.
  • Page 80 01.97 mit Ausnahme von Abschnitt 4.5.1.30, welche von dem benutzten Schwenkarm abhängen.) Recycle Auskunft Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem Partner von Roll MBB Recycling GmbH. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden.

  • Page 81: Fcc Declaration Of Conformity

    Note Use the attached specified shielded cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. -AC Cord -Signal Cable (D-SUB mini 15 pin - D-SUB mini 15 pin, MD-C91) This Class B digital apparatus complies with Canadian ICES-003.

Table of Contents