Eizo FlexScan L885 User Manual page 37

Problems
11. Afterimages appear.
12. The screen has defective pixels (e.g.
slightly light or dark).
13. Fingerprints remain on the screen.
14. The noise appears on the screen.
15. The <Smoothing> cannot be
selected.
16. The Main menu of ScreenManager
does not operate.
17. The FineContrast mode does not
operate.
18. The Auto Adjustment Button does
not operate.
19. Frequency does not change after
installing "Monitor information file"
in the attached utility disk on
Windows 98/2000/Me/XP.
Points to check with Possible Solutions
When the screen image is changed after displaying
the same image for a long period, an afterimage
may appear. The "Afterimage" can be removed
gradually by changing the displayed image. Use the
"Off Timer" function and avoid keeping the screen
on all the time. (p.21)
This is due to the characteristics of the panel itself
and not the LCD product.
Leaving the screen white may solve the problem.
Change the mode in <Signal Filter> in the <Screen>
menu.
<Smoothing> is disabled when the screen is
displayed in the 1600 x1200.
The image size is doubled both in horizontally and
vertically to (i.e. 1600 x 1200 enlarged from 800 x
600) provide clear focus which does not require
this function.
The adjustment lock is probably on. To unlock:
turn the LCD monitor off. Then, while pressing
the Auto Adjustment Button, turn the power on.
(p.21)
Check that the FineContrast mode is not activated.
(p. 18)
Check that the Main menu of ScreenManager is
not activated. (p.20)
The adjustment lock is probably on. To unlock:
turn the LCD monitor off. Then, while pressing
the Auto Adjustment Button, turn the power on.
(p.21)
Use the graphics board's utility software to change
the input signal frequency.
6. TROUBLESHOOTING
English
37