Check Point Smart-1 225 Getting Started Manual page 37

Item Component
3 Cover screws
4 Alarm Off button for
power supply units
5 LED indicator for
each power supply
unit
6 Power supply units
7 Main power switch
8 ESD grounding plug Connect an ESD strap to this plug when servicing the
9 Grounding point
10 SAN ports
Description
Loosen screws to remove the cover of the appliance.
If a power supply fails or is not connected to the outlet,
an alarm sounds continuously. Press this button to turn
off the alarm.
• Off - Power off
• On (Green) - Power on
2 redundant, AC power supplies that you can hot swap.
Each power supply unit connects to an electric outlet.
•
Short press to turn on (when off)
• Short press to shut down (when on)
• Long press to force shut down (when on)
appliance.
Use when a DC Power Supply Unit is installed.
For the optional SAN (Storage Area Network) card.
Smart-1 225/3050/3150 Appliances Getting Started Guide
Smart-1 Appliances Hardware
| 37