LawnMaster CLHT2422 Operator's Manual page 16

OPERATION
Trimming (See figs. 6-7)
● Cut and remove branches exceeding the cutting capacity of this product using a proper pruner
before operation.
● Move the cutting device lightly through the cutting surface in a sweeping motion following the
shape of the hedge or shrub.
● A slight tilt downwards of the cutting device in the direction of motion is recommended for
optimum cutting performance.
● Do not to rush and do not attempt to cut too much with one stroke of the cutting device.
● First cut both sides from the bottom cutting upwards to the top.
● This will prevent any of the trimmings falling into the path of the area still to be cut (Fig. 6).
● After cutting the sides proceed to the top (Fig. 7).
Fig. 6
● To store hedge trimmer, remove battery pack
from unit and use the convenient protective tip
to hang your hedge trimmer out of the way
until next use (Fig. 8).
Hang Hole
16
Fig. 7
Fig. 8