Table of Contents
Advertisement
System Date
The date format is <day><month><date><year>.
Day of the week, from Sun to Sat, determined by BIOS. Read-only.
Day
The month from Jan. through Dec.
Month
The date from 1 to 31 can be keyed by numeric function keys.
Date
The year depends on the year of the BIOS.
Year
System Time
The time format is <hour><minute><second>.
Primary IDE Master / Slave
SATA Channel 1, 2, 3, 4, 5, 6
While entering setup, BIOS auto detest the presence of IDE devices. This displays the status
of auto detection of IDE devices.
Type: The optional settings are: Not Installed; Auto; CD/DVD and ARMD
LBA/Large Mode: The optional settings are Auto; Disabled.
Block (Multi-Sector Transfer): The optional settings are: Disabled and Auto.
PIO Mode: the optional settings are: Auto, 0, 1, 2, 3 and 4.
DMA MODE: the optional settings are Auto, SWDMAn, MWDMAn , UDMAn.
This option allows you to enable the HDD S.M.A.R.T Capability
S.M.A.R.T.:
(Self-Monitoring, Analysis and Reporting Technology). The optional settings are Auto;
Disabled; and ENABLED.
32 Bit Data Transfer: the optional settings are: Disabled and Enabled.
Floppy A
This item is for specific floppy disk drive settings. Select according to the specification of the
floppy disk you use.
System Memory
This item will show information about the memory modules(s) installed.
3-5
Advanced BIOS Feature
XBLUE- 77A3
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
Advanced Settings
CPU Configuration
Hard Disk Drives
Removable Drives
Quick Boot
ST
1
BOOT Device
nd
2
Boot Device
Boot up Num-Lock
ACPI APIC Support
MPS Revision
↑↓→← : Move Enter: Select +/-/: Value F10: Save ESC:Exit F1:General Help
F5: Discard Changes F6:Standard Settings F7: Optimized Settings
Advanced BIOS Features
Press Enter
Press Enter
Press Enter
Enabled
HDD: PM-WDC WD800
st
1
FLOPPY DRIVER
On
Enabled
1.1
26
Help Item
Configure CPU
Advertisement
Table of Contents
