Hardware Health Configure/Pc Health Status - AMD 770 User Manual

Plug &Play O/S
The optional settings are: No; Yes
No: Let the BIOS configure all the devices in the system.
Yes: Let the operating system configure Plug and Play devices, not required for boot if your
system has a Plug and Play system.
Allocate IRQ for PCI VGA
The optional settings are: No; Yes.
Yes: Assigns IRQ to PCI VGA card if card requests IRQ.
No: Does not assign IRQ to PCI VGA card even card requests an IRQ.
Palette Snooping
The optional settings are: Enabled; Disabled.
Enable: inform the PCI device that an ISA graphics devices is installed in the system so the
card will function correctly.
PCI IDE Bus Master
The optional settings are: Enabled; Disabled.
Enable: BIOS uses PCI busmastering for reading/writing IDE devices.
Offboard PCI/ISA IDE Card
Some PCI IDE cards may require this to be set to the PCI slot number that is holding the card.

3-10 Hardware Health Configure/PC Health Status

This section shows the Status of you CPU, Fan, and Warning for overall system status. This
is only available if there is Hardware Monitor onboard.
XBLUE- 77A3
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
PC Health Status
Smart FAN Configuration
H/W Health Function
CPU Temperature:
System Temperature:
CPUFAN1 Speed:
SYSFAN1 Speed:
SYSFAN 2 Speed:
VLDT:
VDIMM :
Vcore:
VNB:
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Discard Changes F6:Standard Settings F7: Optimized Settings
Hardware Health Configure
Press Enter
Enabled
50 ° C/122 ° F
60 ° C/140 ° F
2923RPM
N/A
N/A
1.160V
2.688V
1.132V
1.128V
37
Help Item