Advanced Bios Features - AMD 880G User Manual

This option allows you to enable the HDD S.M.A.R.T Capability
S.M.A.R.T.:
(Self-Monitoring, Analysis and Reporting Technology). The optional settings are Auto;
Disabled; and ENABLED.
32 Bit Data Transfer: the optional settings are: Disabled and Enabled.
Floppy A
This item is for specific floppy disk drive settings. Select according to the specification
of the floppy disk you use.
System Memory
This item will show information about the memory modules(s) installed.
3-5

Advanced BIOS Features

CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
Advanced Settings
Hard Disk Drivers
Removable Drives
CD/DVD Drives
Quick Boot
st
1 Boot Device
nd
2 Boot Device
rd
3 Boot Device
Boot up Num-Lock
ACPI APIC Support
MPS Revision
↑↓ : Move
Enter: Select
F5: Discard Charges
Hard Disk Drives
Use this item to specifies the boot device priority sequence from available hard drives.
Removable Drives
Specifies the Boot Device Priority sequence from available removable Drives.
CD/DVD Drives
Specifies the boot device priority sequence from available CD/DVD Drives.
Quick Boot
Allows BIOS to skip certain tests while booting. This will decrease the needed to boot
the system.
st nd rd
1 /2 /3 Boot Device
Use this item to specifies the boot sequences from available devices. A device
enclosed in parentheses has been disabled in the corresponding type menu.
Boot Up NumLock Status
The default value is On.
On (default) Keypad is numeric keys.
Keypad is arrow keys.
Off
ACPI APIC Support
Include ACPI APIC table pointer to RSDT pointer list.
MPS Revision
This option is only valid for multiprocessor motherboards as it specifies the version of
the Multiprocessor Specification (MPS) that the motherboard will use.
Advanced BIOS Features
Press Enter
Press Enter
Press Enter
Enabled
CD/DVD:PS-ASUS D
HDD:PM-WDC WD800
USB: JetFlash TS2
On
Enabled
1.4
+/-/: Value F10: Save
F6: Standard Defaults
23
Help Item
Select Power-on state
for Numlock.
ESC: Exit F1: General Help
F7: Optimized Defaults