Table of Contents
Advertisement
DMA MODE: the optional settings are Auto, SWDMAn, MWDMAn, UDMAn.
This option allows you to enable the HDD S.M.A.R.T Capability
S.M.A.R.T.:
(Self-Monitoring, Analysis and Reporting Technology). The optional settings are Auto;
Disabled; and Enabled.
32 Bit Data Transfer: the optional settings are: Disabled and Enabled.
Floppy A
This item is for specific floppy disk drive settings. Select the type of floppy driver
connected to the system according to the specification of the floppy disk you use.
System Memory
This item will show information about the memory modules(s) installed.
3-5
Advanced BIOS Features
Quick Boot
Allows BIOS to skip certain tests while booting. This will decrease the needed to boot
the system.
st
1
Boot Device
Specify the boot sequence from the available devices. A device enclosed in
parenthesis has been disabled in corresponding type menu.
Boot Up NumLock Status
The default value is On.
On (default) Keypad is numeric keys.
Keypad is arrow keys.
Off
ACPI APIC Support
Include ACPI APIC table pointer to RSDT pointer list.
MPS Revision
This option is only valid for multiprocessor motherboards as it specifies the version of
the Multiprocessor Specification (MPS) that the motherboard will use.
Quiet Boot
The optional settings are Enabled and Disable.
Disabled: Display normal POST message.
Enabled: Displays OME logo instead of POST message.
23
Advertisement
Table of Contents
