Interface Label; Administrative Status Label; Interface Type Label; Mac Address Label - Cabletron Systems 5000, 5500 Manual

Interface Device View
Interface Icons

Interface Label

This label displays the interface (port) number.

Administrative Status Label

This label displays the status of this interface. Double-click this label to open
the Interface Status view which allows you to view the operational state of
that interface, and select the administrative status (enable or disable the
port).
Table 2-1. Administrative Status Label Descriptions
Green
Blue
Yellow

Interface Type Label

This label displays the interface type. Some of the possible interface types are
Ethernet, FDDI, T1, PPP, and Reg1822.

MAC Address Label

This label displays the MAC address of this device. Double-click this label to
open the Interface Address Translation table.

Interface Address Translation Table

This table cross-references device IP addresses to device MAC (Physical)
addresses for selected nodes between networks. Double-click any column
entry to open an address-speciÞc Address Translation Table Information view.
The Interface Address Translation Table provides the following information:
Interface Index
A list of interfaces held by the device.
Physical Address
Displays the physical (MAC) address of the interface.
Device Views
2-4
Table 2-1 lists the possible states and their descriptions.
Color Status
ON
OFF
TESTING
Description
Port is operational.
Port is off.
Port is in the test mode.
Cisco Catalyst 5000/5500 Hub
Management Module Guide